how to drain bestway pool without adapter

Draining a Bestway Pool Without an Adapter

Draining your Bestway pool without the use of an adapter can be achieved through a few different methods. While having the specific adapter is ideal, in a pinch, you can follow these steps to successfully empty your pool. Remember, before draining your pool, check local regulations about proper water disposal, as some areas have strict rules about where and how you can release pool water.

Method 1: Using a Garden Hose

One of the most common methods for draining a pool without an adapter is using a standard garden hose to create a siphon. Here’s how:

1. Ensure that one end of the garden hose is firmly inserted into the pool water.
2. Submerge the entire hose into the pool to fill it with water and remove air pockets. This is crucial for starting the siphon process.
3. Once the hose is full of water, quickly take the other end to a lower elevation than the pool’s water level.
4. Keep the end of the hose submerged in a bucket to begin with, to make sure that any potentially chlorinated water does not harm your lawn or plants.
5. Water will start to flow out of the hose due to gravity. Let the hose sit until it has drained the desired amount of water from the pool.

Method 2: Using a Submersible Pump

If you have access to a submersible pump, follow these steps:

1. Place the submersible pump at the bottom of the Bestway pool.
2. Connect a discharge hose to the pump if it doesn’t come with one attached. Make sure it reaches an area where it’s safe to dispose of the water.
3. Plugin and turn on the pump, and allow it to run until the pool reaches the desired water level or is completely drained.
4. Be present during this process to monitor the water level and ensure that the pump does not run dry, which can damage it.

Method 3: Using the Drain Plug

If your Bestway pool comes equipped with a drain plug, you can follow these steps:

1. Find the drain plug at the bottom or side of the pool.
2. Place the pool in such a way that the drain plug is at the lowest point if possible.
3. Remove the plug and allow the water to flow out by gravity. This method is slower and works best for smaller pools.
4. Make sure to direct the draining water to an area where it will not cause damage or erosion.

Tips and Precautions

Here are additional tips and precautions to keep in mind:

• Always direct the drained water to an area where it will have minimal environmental impact.
• Never drain pool water directly into the street, storm drains, or sensitive areas.
• Check for chemical levels and allow chlorine to dissipate before draining, as it can harm the environment.
• Keep children and pets away from the pool and the equipment you’re using to drain the pool for safety reasons.
• Be careful with the use of an electric submersible pump to avoid electrical hazards. Follow the manufacturer’s safety instructions.

Draining your Bestway pool without an adapter is straightforward if you follow these steps. Always remember to consider the safest and most environmentally friendly way to dispose of your pool water.