Introduction to Adjusting UHaul Mirrors
When you rent a UHaul truck for a move, it’s essential to ensure that your side mirrors are properly adjusted to provide the best visibility of the road behind and to the sides of the truck. Properly adjusted mirrors can help prevent accidents by minimizing blind spots. Here is a step-by-step guide on how to adjust the mirrors on your UHaul truck:
Step 1: Park the UHaul Truck on Level Ground
Before you start adjusting the mirrors, make sure that the UHaul truck is parked on level ground and in a safe area, away from traffic. Engage the parking brake to prevent the truck from moving while you make the adjustments.
Step 2: Sit in the Driver’s Seat
Take a seat in the driver’s position and make sure that you are seated comfortably with access to the steering wheel, pedals, and of course, the mirror controls. You should be in the same position that you will be when driving.
Step 3: Adjust the Left Side Mirror
To adjust the left side mirror, use the following steps:
- Look into the left mirror.
- Move the mirror so that you can see the entire left side of the truck, with a small portion of the truck visible at the inner edge of the mirror.
- Adjust the mirror angle to ensure that you can see the road behind you and the immediate area on the side of the truck to cover the blind spot.
Step 4: Adjust the Right Side Mirror
For the right side mirror, follow these instructions:
- Repeat a similar process as the left mirror, making sure you can see the whole right side of the truck and enough of the road to monitor traffic and your blind spot.
- The mirror should show a slight overlap with what is visible in your rear-view mirror, if the truck is equipped with one that provides rear visibility.
Step 5: Check for Manual or Power Controls
Depending on the model of the UHaul truck, mirror adjustments might be manual or powered:
- If the mirrors are manually adjusted, you may need to roll down the window and use your hand to physically move the mirrors. This may require getting in and out of the truck a few times to get it right.
- If the truck has power mirror controls, use the buttons or joysticks located on the door panel or dashboard to adjust the mirrors electronically.
Step 6: Fine-Tuning the Mirrors
Once you’ve done the initial adjustments:
- Drive the truck a little within the parking area to check the mirror positions while in motion.
- If necessary, stop the truck and make further adjustments until you have clear visibility.
Step 7: Seek Assistance if Needed
If you’re having trouble adjusting the mirrors to your satisfaction or if the mirrors seem stuck or malfunctioning, ask a UHaul representative for assistance. It’s crucial to have well-adjusted mirrors before you hit the road.
Conclusion
Proper mirror adjustment on a UHaul truck is a safety essential and easy to accomplish following these steps. Always ensure your mirrors are adjusted before you start driving to your destination. Safe travels and happy moving!