Connecting your iPhone to a Harman Kardon speaker can typically be done using Bluetooth or, depending on the model, through a wired connection. Below are step-by-step instructions to help you connect your iPhone to your Harman Kardon speaker via Bluetooth. If your speaker supports AirPlay or has a physical connection option, those steps are included as well.
Connect iPhone to Harman Kardon Speaker via Bluetooth
Most Harman Kardon speakers are equipped with Bluetooth connectivity. Here’s how you can pair your iPhone to a Harman Kardon speaker using Bluetooth:
Step 1: Enable Speaker’s Bluetooth Mode
Turn on your Harman Kardon speaker and enable Bluetooth pairing. This is usually done by pressing the Bluetooth button on the speaker until you hear an audible tone or see an LED light flashing, which indicates the speaker is in pairing mode.
Step 2: Open iPhone’s Bluetooth Settings
On your iPhone, go to ‘Settings,’ then select ‘Bluetooth.’ Ensure that Bluetooth is turned on; the switch should be green.
Step 3: Pair the Devices
Your iPhone will search for available Bluetooth devices. Look for the name of your Harman Kardon speaker in the list and tap on it to pair. If a passcode is required, enter ‘0000’ or refer to your speaker’s manual for the correct code.
Step 4: Confirm Connection
Once connected, the Harman Kardon speaker may sound a tone, and the LED light might stop flashing. Confirm on your iPhone that the speaker is listed as ‘Connected’ under ‘My Devices’ in the Bluetooth menu.
Step 5: Play Audio
You can now play audio from your iPhone, and the sound will be output through your Harman Kardon speaker.
Connect iPhone to Harman Kardon Speaker via AirPlay (if supported)
If your Harman Kardon speaker supports AirPlay, here’s how you can connect your iPhone:
Step 1: Connect to Wi-Fi
Ensure both your iPhone and the Harman Kardon speaker are connected to the same Wi-Fi network.
Step 2: Select Speaker in AirPlay
On your iPhone, open the Control Center (swipe down from the top-right corner of the screen on an iPhone with Face ID or up from the bottom of the screen on an iPhone with a Home button). Tap the AirPlay icon (a triangle with circles), and select your Harman Kardon speaker from the list of AirPlay devices.
Step 3: Play Audio
Start playing audio on your iPhone, and it should stream to your Harman Kardon speaker via AirPlay.
Connect iPhone to Harman Kardon Speaker via Wired Connection
If your speaker has an auxiliary input, you can connect it to your iPhone using a 3.5mm audio cable or via an iPhone adapter if your device does not have a headphone jack.
Step 1: Connect the Audio Cable
Plug one end of the audio cable into your iPhone’s headphone jack or adapter and the other end into the AUX input on the Harman Kardon speaker.
Step 2: Set Speaker to AUX Mode
Turn on your speaker and switch it to AUX mode, if necessary. This might be labeled as ‘AUX’ or ‘Line-In’ on the speaker.
Step 3: Play Audio
Play audio from your iPhone, and it should be played through the speaker’s wired connection.
Make sure to have your Harman Kardon speaker user manual handy for any model-specific instructions or troubleshooting. Refer to the manual if you experience issues during the connection process.