How to fix a squeaky ps5 trigger

Introduction

If you’re experiencing a squeaky trigger on your PlayStation 5’s DualSense controller, it can be rather distracting during gameplay. The good news is that there are several ways to address this issue without needing professional repair services. Below, you’ll find a step-by-step guide to help you fix a squeaky PS5 trigger.

Gather Your Tools

Before you start, you will need a few tools:

• Small Phillips screwdriver
• Compressed air
• Isopropyl alcohol (at least 70%)
• Cotton swabs or microfiber cloth
• Lubricant suitable for plastic parts (such as silicone-based lubricant)

Step 1: Try Compressed Air

Often, the squeak in a controller’s trigger is due to dust and debris. Here’s how to use compressed air to potentially solve the problem:

1. Turn off your PS5 and disconnect your controller.
2. Aim the nozzle of the compressed air can at the base of the trigger.
3. Gently spray the air into the gap around the trigger, ensuring you cover all angles.
4. Press the trigger several times to work any loosened debris out.

Step 2: Clean with Isopropyl Alcohol

If compressed air didn’t solve the problem, cleaning the trigger with isopropyl alcohol may help:

1. Dip a cotton swab into the isopropyl alcohol, ensuring it’s not dripping wet.
2. Swab around the base of the trigger where it meets the controller housing.
3. Press the trigger repeatedly to allow the alcohol to seep into the mechanism.
4. Wait for the alcohol to completely evaporate before using the controller again.

Step 3: Apply Lubricant

If the squeaking persists, you might need to apply lubricant:

1. Identify a suitable plastic-safe lubricant.
2. Apply a small amount of lubricant to the base of the trigger.
3. Work the trigger back and forth to distribute the lubricant.
4. Wipe away any excess lubricant to avoid attracting more dirt.

Step 4: Disassemble and Clean

If the above steps haven’t fixed the issue, you may need to open up the controller. This should be done cautiously, as it could void your warranty.

1. Use the Phillips screwdriver to remove screws from the controller’s back.
2. Gently separate the controller’s halves. Be mindful of any ribbon cables that may connect the two halves.
3. Locate the trigger and its spring mechanism.
4. Use isopropyl alcohol and a microfiber cloth to carefully clean the trigger’s components.
5. Apply a thin layer of lubricant to the moving parts of the trigger mechanism.
6. Reassemble the controller, making sure all the parts are correctly in place and screws are tightened.

Professional Repair or Replacement

If you’re not comfortable opening your controller or the squeak persists after you’ve tried these steps, you may want to consider a professional repair or contacting Sony’s customer service for a potential replacement, especially if your controller is still under warranty.

Conclusion

Squeaky PS5 triggers are usually caused by dust or lack of lubrication. By following these steps, you should be able to fix the issue yourself. However, if you’re unsure at any stage, it’s best to consult a professional to avoid damaging your controller.