Introduction
Hanging a pegboard without drilling is an excellent option for renters or anyone who wants to avoid damaging their walls. There are several methods to do this, each fitting different wall types and pegboard weights. Here I will guide you through multiple methods step by step to hang your pegboard without the need for drilling.
Method 1: Adhesive Mounting Strips
Materials Needed
- Adhesive mounting strips (e.g., Command strips)
- Level
- Measuring tape
- Cleaning materials
Step-by-Step Instructions
- Choose the right adhesive strips for the weight of your pegboard.
- Clean the wall area where the pegboard will be placed with a dry cloth to ensure it’s free of dust and grease.
- Measure and mark the spot where you want to place your pegboard. Use a level to make sure your markings are straight.
- Apply the adhesive strips to the back of the pegboard according to the package instructions. Typically you’ll place them on each corner and a few along the edges, depending on the size of the pegboard.
- Press the pegboard against the wall, aligning it with your marks. Apply pressure for 30 seconds or as directed by the strip’s instructions. This helps to secure the bond.
- Wait for the amount of time recommended by the adhesive strip manufacturer before hanging any items on the pegboard to ensure the strips have fully adhered to the wall.
Method 2: Over-the-Door Hooks
Materials Needed
- Over-the-door hooks that fit your door’s width
- Rope, cable ties, or sturdy string
Step-by-Step Instructions
- Place the over-the-door hooks on the top edge of your door.
- If the pegboard has pre-drilled holes, you can run a rope or cable ties through them. If not, you may need to attach some hooks or ties to the back of the pegboard to use for hanging.
- Attach the pegboard to the over-the-door hooks using the rope, cable ties, or string, ensuring that it is secure and level.
- Adjust the length of the rope or ties so that the pegboard is at the desired height.
Method 3: Tension Rods
Materials Needed
- Tension rods
- S-hooks or zip ties
Step-by-Step Instructions
- Adjust the tension rods to fit the width of your space, typically between two walls or inside a closet.
- Install the tension rods horizontally at the top and bottom edges of where the pegboard will be placed.
- Attach S-hooks or zip ties to the top and bottom of the pegboard as necessary.
- Hang the pegboard on the tension rods using the S-hooks or zip ties, making sure it is secure and straight.
Conclusion
Whichever method you choose, ensure that the pegboard is securely attached to avoid accidents or damage to what you hang on it. Always follow the weight guidelines for adhesive strips and test the setup before adding tools or other heavy items. This way, you can enjoy the practicality of a pegboard without damaging your walls.