Introduction to Installing Levolor Faux Wood Blinds
Installing Levolor Faux Wood Blinds in your home is a great way to add style and privacy to your windows. These blinds are durable, easy to clean, and provide the elegant look of real wood at a more affordable price. Below, I will walk you through the process step by step, so you can install your Levolor blinds with confidence.
Tools and Materials Needed
Before you start the installation process, make sure you have the following tools and materials ready:
- Levolor Faux Wood Blinds
- Steel measuring tape
- Level
- Phillips and flathead screwdrivers
- Drill with bits (appropriate for your wall material)
- Hammer (if using wall anchors)
- Wall anchors and screws (included with blinds)
- Pencil
- Ladder or step stool
Step 1: Measure Your Window
Before purchasing your blinds, measure the inside width of your window frame where the blinds will be mounted. If you prefer an outside mount, measure the desired width and height of the area you wish to cover.
Step 2: Check the Package Contents
Ensure you have all the necessary components included with your Levolor Faux Wood Blinds. This typically includes the blinds, mounting brackets, screws, and wall anchors.
Step 3: Position the Mounting Brackets
Determine whether you will be using an inside or outside mount for your blinds:
- Inside Mount: Position the brackets against the top inside corners of the window frame.
- Outside Mount: Position the brackets outside and above the window frame at your desired height.
Use a pencil to mark the spots where the screws will go. Make sure the brackets are level.
Step 4: Pre-drill Holes for the Brackets
Using your drill, make pilot holes where you have marked for the bracket screws. If your window frame is made of a material that does not hold screws well, like drywall or plaster, use the provided wall anchors to secure the brackets.
Step 5: Install the Mounting Brackets
Align the brackets over the pre-drilled holes or wall anchors and secure them with screws. Tighten the screws with a screwdriver to ensure that the brackets are firmly attached.
Step 6: Attach the Valance Clips (If Applicable)
If your Levolor Faux Wood Blinds come with a valance, attach the valance clips to the headrail before mounting the blinds. Space them evenly to support the valance properly.
Step 7: Install the Blinds
With the mounting brackets in place, slide the headrail of your blinds into the brackets. Most headrails will click into the bracket when properly seated.
Step 8: Secure the Blinds and Install the Valance
If the brackets have a swinging arm or a cover, close them to secure the headrail. Once the blinds are secured, snap the valance into the valance clips if you have them.
Step 9: Test Your Blinds
Lower and raise the blinds using the provided wand or cords to ensure they operate smoothly. Adjust the slats to both the open and closed positions to check for proper function.
Conclusion
With these steps completed, your Levolor Faux Wood Blinds should be successfully installed and ready for use. Always refer to the specific instructions provided with your blinds, as there may be slight variations based on model and size. Remember, safety comes first, so if you’re not comfortable using tools or ladders, consider hiring a professional to handle the installation.