how to level a camper without moving it

How to Level a Camper Without Moving It

Leveling a camper is a crucial step to ensure the comfort and safety of your mobile home. An uneven camper can lead to problems with your refrigerator, slide outs, and overall stability. Fortunately, you can level a camper without moving it by following these step-by-step instructions.

Step 1: Assess the Level of Your Camper

Before you start making adjustments, you need to determine how off-level your camper is. Use a bubble level or a leveling app on your smartphone and place it on the floor of your camper. Check both the side-to-side level and the front-to-back level to assess which areas need adjustment.

Step 2: Acquire the Necessary Leveling Tools

You will need to have leveling blocks or pads, a jack appropriate for your camper’s weight, and wheel chocks. Make sure that the tools you choose are rated for the weight and size of your camper.

Step 3: Level Side-to-Side

If your camper is uneven from side to side, you’ll need to raise the lower side to match the higher side. You can do this by placing leveling blocks or pads beneath the tires of the lower side. Do this by:

1. Placing the leveling blocks in front of the tires.
2. Asking a helper to watch the level while you slowly drive the camper onto the blocks, or by using a jack to lift the camper and then placing the blocks underneath the tires.
3. Re-checking the level to ensure the camper is even from side to side. You may need to adjust the number of blocks used.
4. Securing the camper with wheel chocks to prevent it from rolling off the blocks.

Step 4: Level Front-to-Back

If your camper needs adjustment from front to back, you will use the tongue jack (for a travel trailer) or the leveling jacks on a motorhome. Follow these steps:

1. Adjust the tongue jack up or down to raise or lower the front of the camper.
2. For campers with leveling jacks, use the built-in system to adjust the height. Always refer to the owner’s manual for proper usage of your specific system.
3. Re-check the level and make further adjustments if necessary.

Step 5: Fine-Tuning Your Camper’s Level

After the initial adjustments, go back and re-check both side-to-side and front-to-back levels. You might need to make minor adjustments until your camper is completely level.

Step 6: Secure Your Camper

Once leveled, make sure to properly stabilize your camper to prevent any movements. Use stabilizing jacks or supports under the frame of your camper, if available, to reduce bounce and add support.

Additional Tips for Camper Leveling

• Always perform leveling on a solid and stable surface to prevent sinking or shifting of blocks or jacks.
• Never use the stabilizing jacks to level the camper; they are designed to stabilize, not lift.
• For a permanent setup, consider having a professional install a leveling system that can be adjusted without moving the camper.
• Ensure the camper is not only level but also parked in a location where it will not be prone to shifting due to environmental factors such as heavy rain or wind.

Remember, safety should be your top priority when leveling your camper. Always follow the manufacturer’s guidelines and instructions for your specific camper model and leveling tools. If you’re ever unsure, seek professional help. A well-leveled camper will provide you a more enjoyable and carefree camping experience.