Loading staples into a Stanley staple gun is a straight-forward process. Whether you have a manual or an electric Stanley staple gun, the basic principles for loading staples are similar. Here is a step-by-step guide to help you through the process:
Identify Your Stanley Staple Gun Model
Before you start, ensure that you know the exact model of your Stanley staple gun because the loading mechanism may vary slightly between different models. Common models include the manual Stanley TR45 and TR110, or electric models like the Stanley TRE550.
Step 1: Ensure Safety
First and foremost, before you load the staples, ensure that the staple gun is not connected to any power source (if it’s electric) and that the trigger lock is engaged. This is to prevent accidental firing of the staple gun while you’re loading it.
Step 2: Purchase the Correct Staples
Before loading your Stanley staple gun, you’ll need to make sure you have the correct size and type of staples. Check the user manual or the markings on the staple gun itself to determine the appropriate staple size. Staples are typically available at hardware stores or online.
Step 3: Open the Staple Gun
Different models have different methods of opening the loading chamber, but usually, it involves pressing a release button or squeezing a latch found at the rear of the staple gun. Once activated, the staple tray should either pop out or slide open.
- For a bottom-loading staple gun: locate the release at the bottom of the gun, usually at the back end. Push in and down, then pull out the tray.
- For a rear-loading staple gun: find the release clip at the back and pinch or push it to release the tray.
Step 4: Load the Staples
Take a strip of staples appropriate for your model and insert them into the chamber. Ensure they are positioned correctly—the legs of the staples should be facing down, and the sharp points should be facing out of the gun. The staples should slide neatly into the track provided.
Step 5: Close the Staple Chamber
Carefully push the staple tray or chamber back into the gun until it clicks into place, indicating that it’s securely locked. For bottom-loading models, push the tray in and up until it clicks. For rear-loading models, you’ll likely just need to push the tray straight in.
Step 6: Test the Staple Gun
Point the staple gun away from yourself and others, release the trigger lock if your model has one, and test fire it into a piece of scrap material. This will ensure that the staples are properly loaded and that the gun is functioning correctly.
Troubleshooting Tips
If the staple gun doesn’t properly fire after loading, make sure that:
- The staples are the correct type and size for your specific model.
- The staple gun’s chamber is not jammed with a lodged staple from previous use.
- The staples are loaded in the correct orientation, with the points facing out.
- The staple gun’s moving parts are not obstructed with debris or damage.
If you encounter a jam, refer to your user manual on how to safely clear the obstruction or perform any necessary maintenance.
Conclusion
Now that you’ve successfully loaded your Stanley staple gun, you’re ready to tackle your project. Always ensure to follow safety protocols while using such tools to prevent any accidents.
If you are still unsure or require more specific information, consult your Stanley staple gun’s user manual for model-specific instructions or reach out to Stanley customer service for additional support.