Resetting the “Change Oil” light on a Chevy vehicle can vary slightly depending on the model and year of your vehicle. However, many Chevy vehicles follow a similar process. Below is a step-by-step guide that covers a general method for resetting the “Change Oil” light. Please refer to your vehicle’s owner’s manual for model-specific instructions.
General Steps to Reset the Change Oil Light on a Chevy
Step 1: Turn on the Ignition
Insert your key into the ignition and turn it to the “ON” position, but do not start the engine. In some Chevy models, this is done by pressing the push start button without pressing the brake pedal.
Step 2: Access the Oil Life Display
Access the oil life system by pressing the information or menu button on the dashboard or the steering wheel (this can be a button that looks like an ‘i’, or it may say ‘info’ or ‘menu’). Continue to press the button until the “Oil Life” percentage appears on the dash display.
Step 3: Reset the System
With the “Oil Life” percentage on the display, press and hold the reset button or the arrow button for several seconds until the oil life resets to 100%. The reset button may also be labeled as ‘clr’, ‘clear’, ‘reset’, or represented with an arrow circling around.
Step 4: Turn Off the Ignition
Once the display shows that the oil life has been reset, turn off the ignition by removing the key or pressing the push start button again.
Step 5: Verify the Reset
To ensure that the “Change Oil” light has been successfully reset, start the engine. The light should no longer be illuminated. If it’s still on or comes on after a while, repeat the reset process or check for other issues that might be triggering the light.
Remember that resetting the “Change Oil” light should be done only after the oil has been changed. Ignoring oil change intervals can lead to serious engine damage.
Model-Specific Instructions
If you have a specific model of Chevy and the general instructions do not apply, or if you are encountering difficulties, you may need model-specific instructions. The process can be slightly different for models such as the Chevy Silverado, Malibu, Equinox, or Cruze, just to name a few. For accurate information for your specific vehicle model:
–
Consult the owner’s manual that came with your Chevy. It will have the most accurate instructions tailored to your specific model.
–
Visit the Chevrolet official website or contact a local dealer. They may provide online resources or assistance over the phone.
–
Check for any video tutorials online. Sometimes other Chevy owners or professionals will post detailed tutorials for specific models and years.
If the light does not reset or if you’re getting a message indicating service is needed after performing the reset, it may be time to consult a professional as there could be another issue with your vehicle.